[Micra PE] I made an automatic door with a sticky piston

I made an automatic door using [adhesive piston] added in "Micra PE".

The device is not so difficult, so please refer to it.

Make an automatic door with an adhesive piston

First, make a hole for 2 squares depth in 3x8 size.

Next, if you can do anything, install the block in a staircase.

And, as shown in the image, assemble the circuit with [Red Stone] and [Red Stone Torch].

Here is the appearance of the adhesive piston.It will be installed next to the red stone torch.

Because it is a door, it will be set up for two squares so that it can be passed, but this does not reach the upper adhesive piston.

However, if you install any blocks on the red stone torch, you will be able to reach the upper adhesive piston.

This is almost complete.

After that, fill the extra holes ... (pigs are curious)

Install the [Pressure board] and open it automatically.

I used [glass] for the door.If you use glass, it looks like an automatic door.

I made a building using an automatic door

I made an automatic door, so I made a building.It is a small library.

The door opens automatically when you step on the pressure plate.

(Gacha)

A device using a piston seems to be still made!Please make various devices using the added piston!

Minecraft PE Summary

Introducing the latest information and capture articles of Micra PE.Please take a look.→ [Micra PE] Summary page of the latest news / capture article

＼ こちらもおすすめ ／

Minecraft PE Summary

Introducing the latest information and capture articles of Micra PE.Please take a look.→ [Micra PE] Summary page of the latest news / capture article

＼ こちらもおすすめ ／