Fingerprint authentication + PIN + key, smart locker "MIB" with 3 types of unlocking methods
"MIB" features:
・Fingerprint + PIN + key, easy to use with many types of unlocking!
・Up to 20 fingerprints can be registered, so it can be used by the whole family!
・Can be used for up to 3 months or more with one full charge!
"MIB" is a smart locker for general households equipped with 3 types of unlocking methods: fingerprint + PIN + key. Protect your valuables such as brand watches, necklaces, pearls, jewelry, important materials, documents, etc.
"MIB" is equipped with three types of unlocking methods: fingerprint, PIN, and key. Many unlocking methods are easy to use, so unlocking is easy!
Unlock with fingerprint authentication
Unlock with PIN
Unlock with key
"MIB" can register up to 20 fingerprints, so anyone in your family can unlock it.
"MIB" can store various valuables such as necklaces, earrings, rings, cash, documents, and pearls.
It also comes with a security wire, so you don't have to worry about the whole locker being stolen!
"MIB" is equipped with a 2500mAh battery and can be charged with a Type-C cable, so there is no cost to replace the battery!
It takes about 4 hours to fully charge the battery once. Equipped with a low power consumption chip, "MIB" can stand by for up to 3 months or more with a single full charge.
"MIB" is a black and simple design. A timeless design.
Q: Please tell me about the solidity of the locker.
A: Because it uses an aluminum alloy material, it is hard enough to be opened by an external force.
Q: Please tell me how to register fingerprints and set a PIN.
A: Please refer to the included instruction manual for detailed explanations.
Q: What should I do if I lose my key?
A: You will be asked to unlock with your fingerprint authentication or PIN. Keys and lockers have a one-to-one relationship. Since it cannot be reproduced after shipment, please store it securely so as not to lose it.
Q: What should I do if I forget my PIN?
A: First, unlock with fingerprint or key. After unlocking, follow the instructions in the instruction manual to reset your password.
Q: If you enter the wrong PIN code 5 times in a row, or if fingerprint authentication fails 5 times in a row.
A: The locker will be locked for 3 minutes. During this 3 minute period, the door will not respond to any operation other than unlocking it with the key.
Q: Are locker keys shared?
A: Keys and lockers have a one-to-one relationship, so you cannot open other lockers.
Q: Regarding key storage.
A: If you forget your PIN and cannot authenticate your fingerprint, the key will be the only way to unlock the door, so please do not keep the key inside the locker. Be sure to keep the key securely in a separate place.
Q: How do I charge the battery?
A: Please charge with a 5V/2A or less power adapter (sold separately). Using a power input of 5V/2A or more may damage the device, so please do not use a power adapter or quick charger with a large output power.
Q: Tell me about the lamp when charging.
A: When charging, buttons 1 to 5 will flash green in sequence repeatedly. After charging is completed, all 5 number buttons are always green.
Q: Is this product waterproof?
A: No, it's not waterproof. Be careful not to get it wet, immerse it in water, or wash it with water. Be especially careful with the fingerprint authentication part.
Q: Do you have a product warranty?
A: We have a 6-month warranty from the date of delivery. The warranty covers initial defects and failures due to normal use. Natural wear and tear, deterioration over time, damage due to incorrect use, etc. are not covered by the warranty.
Q: About returns and exchanges.
A: In the case of initial defects or defects due to manufacturing defects, we will exchange the product free of charge if you contact us within 7 days after arrival. Failure or damage due to misuse, remodeling, or improper repair is not covered by the warranty, so we cannot accept returns or refunds.
*We cannot accept returns due to customer preferences.
*If the number of donations exceeds expectations, the shipping date may be delayed due to reasons such as the manufacturing process.
*Products under development are subject to change in design and specifications.
*If we receive more support than we expected through this project, and if we can further improve the mass production system from the current environment, the official selling price may be lower than the planned selling price.
* Parallel import goods may be distributed. Please note that it may not be possible to prevent it depending on personal imports and sales channels.
Due to the nature of crowdfunding, we kindly ask for your understanding and understanding of the above precautions in advance and for your support.